ARCEE Automations  
 
 
 
   
 
 
 
 
 
 
 
 
 
  ABACUS MC AXIS CONTROLLERS
  New generation of Axis controllers feature Multi-axis capability, standard Ladder Logic for programming, built-in HMI programming tool, program simulation on PC and MODBUS open protocol. Built-in PLC with 16DI + 16DO expandable to 32DI + 32DO. The controller is housed in a standard 19" rack for ease of mounting. Remote display option is available.
   
  These controllers provide a complete solution for applications requiring position control on a single or multiple axes, and excellent performance in electrically noisy environments. A choice of LCD display / keyboard panels can be used to display and enter position, speed and other information. Up to 3controllers can be connected together for multi-axis operations.
   
  Each axis can be indipendently configured with a range of standard AC Servo or DC Servo or Stepper axis drives, Providing a great flexibilty for system design & integration.
   
   
   
  Choose from the following models for your most optimum solution:
   
  XYZEE AXIS CONTROLLER
   
 
   
 

ABACUS MC positioning modules are ideally suited for controlling motion on a single axis, using a variety of drives supporting analog / Step & direction inputs. Using a master / slave configuration, upto 3 axes can be controlled by a single system. The PC based PLC type ladder programming also allows control of other miscellaneous machine functions, using the general purpose inputs and outputs.

   
 

FEATURES Master / Stand Alone Unit

  • 16 x 2 line backlit LCD display with keyboard & program lock
  • 16 basic digital inputs and 16 basic digital outputs
  • Analog / Step & Direction Output for drive interface
  • Dedicated I/O for drive interface - Limits, Reference, Error, Enable, Reset
  • Encoder interface, Max Frequency 500KHz
  • RS 232 / RS485 interface for PC programming / Slave Connection
   
 

Options

  • 20 x 4 line backlit LCD display with keyboard & program lock
  • 16 expansion digital inputs and 16 expansion digital outputs
  • 8 x Analog inputs (0-10V DC / 4 - 20mA)
  • 4 x Analog Outputs (0-10V DC / 4 - 20mA)
   
  Slaves
 
  • Analog / Step & Direction output for drive interface
  • Dedicated I/O for drive interface - Limits, Reference, Error, Enable, Reset
  • Encoder interface, Max Frequency 500KHz
  • RS 485 interface for master connection
   
 

Software

 
  • Programmable using PC based ladder type logic
  • 2 Programmable open loop stepper controls in the master unit
  • 3 Possible modes of axis operation in Analog type models- single quadrant, velocity, torque (Firmware Version dependent)
  • 64 timers / counters
  • 120 Bytes flag memory ( 960 bits )
  • 10K Bytes program memory (approx. 3K instructions)
  • 2K Words Data memory
   
  Specifications:
 
  Power Requirement
-
230V AC, 50Hz
  Display
-
Alphanumeric LCD display, LED backlight
  Keyboard
-
Sealed membrane keyboard, tactile feedback
  Digital Outputs
-
24V DC, NPN, 50 mA max.
  Digital Inputs
-
24V DC, NPN, 7 mA
  Analog output
-
+/-10V DC, 12 bit resolution (for Drive Interface O/P), Others 0-10VDC, 12 bit resolution.
  Analog input
-
0-10V DC, 12 bit resolution
  Encoder
-
5V 100mA max. power out. 2 phase quadrature + index, 500 KHz.
  Data memory
-
Battery backed, 3 Volt Lithium cell
  Program memory
-
Flash
  PC communication
-
RS 232, 9600 baud
  Master/Slave comm.
-
RS 485, 125K baud
   
   
   
 
OPTIONS AND CUSTOMIZATION:
  The controllers are available with a choice of LCD display panels, and expansion I/Os as described. We can also provide complete packages including single or four quadrant drive, motor and encoder, power supplies, etc. to suit your requirements. Contact us for any customized requirements you may need for your application.