ARCEE Automations  
 
 
   
 
 
  "Arcee Automation selected for listing as "Leading SMEs of India 2015 " for Dun & Bradstreet" magazine
  VISIT US AT STALL NO: A 21 CHENNAI TRADE CENTRE - 16TH TO 20TH JUNE 2016
  VISIT US AT STALL NO: A 21 CHENNAI TRADE CENTRE - 19TH TO 23RD JUNE 2014
  VISIT US AT STALL NO: E2 AT AUTOMATION EXPO 2011, CHENNAI TRADE CENTRE - 21ST TO 23RD APRIL 2011
  VISIT US AT ACMEE 2008, CHENNAI TRADE CENTRE - 19TH TO 23RD JUNE 2008
  ARCEE ROBOTICS & MACHINE VISION LAB INAUGURATED ON 11TH JULY'07
  ABB ROBOTICS DIVISION PARTNERS ARCEE
  VISIT US AT IMTEX 2007 STALL NO:A 105 FROM 18TH TO 24TH JAN'07 @ BANGALORE
  DELPHI TVS CHENNAI - 2D MATRIX ID READING AND VISION INSPECTION EVALUATE
  MACHINE VISION FOR ENGINE VALVE INSPECTION
  VIPA GMBH PRODUCT LAUNCH OF CE TOUCH PAD TERMINALS & SEMINAR AT CHENNAI
  LIVE DEMO OF INSIGHT 5100 MACHINE VISION SYSTEM WITH ABB 1410 ROBOT AT THE INTERNATIONAL INDUSTRIAL EXHIBITION - ACMEE 2006.
  ARCEE DEVELOPS AND SUCCESSFULLY DEMONSTRATES - MACHINE VISION FOR ROBOTIC GUIDANCE WITH ABB ROBOT IRB 340
  PRODUCT LAUNCH ! CONGRATULATIONS! TO OUR R&D TEAM
  L&T ECC ENTRUSTS ARCEE FOR A CRITICAL SOLUTION IN WARF CRANE APPLN. AT CHENNAI PORT TRUST
  ARCEE BAGS NAMAKKAL AT TAMIL NADU AND PUNJAB BIO-GAS PLANTS
  ARCEE AUTOMATIONS HAVE BEEN AWARDED
  ARCEE AUTOMATIONS UNVEILS SCANNED MATRIX PLCS FOR ELEVATOR APPLICATIONS
  ARCEE AUTOMATIONS OFFERS LOW COST ALPHA NUMERIC DISPLAYS FOR VIPA GMBH
 
     
 
 
 
VISIT US AT STALL NO: A 21 CHENNAI TRADE CENTRE - 19TH TO 23RD JUNE 2014
 
  Visit us at stall No:A 21 at Chennai Trade Centre during 19th to 23rd June 2014. 11th International Machine Tools Exhibition.  
     
     
 
VISIT US AT STALL NO: E2 AT AUTOMATION EXPO 2011, CHENNAI TRADE CENTRE - 21ST TO 23RD APRIL 2011
 
  Visit us at stall No:E2 at Automation Expo 2011 at Chennai Trade Centre during 21st to 23rd April 2011. On display - Cognex Machine Vision Sensors; Vision Systems; Vision Software & 1D / 2D Data Readers.  
     
     
 
 
VISIT US AT ACMEE 2008, CHENNAI TRADE CENTER - 19TH TO 23RD JUNE 2008
 
  Live demo of ABB Robot with COGNEX Vision guidance at our stall No.10, Hall No.1 at chennai trade center during 19th to 23rd June 2008.  
     
     
 
 
ARCEE Robotics & Machine Vision Lab inaugurated on 11th July'07 (Posted on Wednesday, July 25, 2007)
 
  world class lab for robotics & machine vision. Aug'07 1st batch of training session commences.  
     
     
 
 
ABB Robotics Division Partners ARCEE (Posted on Tuesday, April 03, 2007)
 
 

ARCEE has been appointed global channel partner for their robotics division. Robot training & development centre for Chennai region would be inagurated during mid May'07. The center would have the state of art Machine Vision Lab and Robotics development & deployment setup.

Enrolment for training programs would commence from 1st May'07 itself. Look up the site for further notifications.

 
     
     
 
 
Visit us at IMTEX 2007 Stall No:A 105 From 18th to 24th Jan'07 @ bangalore (Posted on Friday, January 12, 2007)
 
 

Arcee along with ABB Ltd Robotics Division are now show casing Cognex Vision guidance for ABB robot at stall No.A 105 IMTEX 2007 @ Bangalore International Exhibition Centre during 18th to 24th Jan'07.

On display Machione Vision System for Pattern Recognition; Gauging; OCR / OCV; Direct Part Mark Identification for Bar Code / 2D data & Robotic Guidance

 
     
     
 
 
Delphi TVS Chennai - 2D Matrix ID reading and Vision inspection evaluated (Posted on Thursday, November 16, 2006)
 
 

Delphi TVS plans to impliment 2D Matrix ID reading and final assembly of CRDI pumps machine vision inspection and ARCEE sucessfully evaluates application. Details click extn.

 
     
     
 
 
Machine Vision for Engine valve Inspection (Posted on Wednesday, August 09, 2006)
 
 

Machine Vision System for inspection of Engine valves for Rane Engine valves Ltd, the application has been evaluated successfully for details view attached file.

 
     
     
 
 
VIPA GmbH Product Launch of CE Touch Pad Terminals & Seminar at Chennai (Posted on Wednesday, July 12, 2006)
 
 

Launch of: State of Art HMI 5.7” to 10.4” Touch Panels (Windows CE 5.0) & built in run time SCADA (Movicon X / ZenOn 6.0)

And A Technical presentation on Speed 7

Fastest PLC worldwide

The event is hosted by:

Mr. Bobbie Linkenbach - Director: International Sales

Mr. Peter Jacobi - Head: Customer Care

On 17th July 2006 (Monday) At 18:30 Hrs

Venue: Hotel LE ROYAL MERIDIEN # 1, G.S.T. Road, St. Thomas Mount, Chennai " 16

 
     
     
 
 
Live demo of Insight 5100 Machine Vision System with ABB 1410 Robot at the International industrial Exhibition - ACMEE 2006.
(Posted on Saturday, May 27, 2006)
 
 

Visit us at stall No.65, ACMEE 2006, Chennai Trade Center, Chennai, TN, India, from 8th to 12th June 2006. On display are PLC Systems " from VIPA GmbH, Speed 7 " world’s fastest PLC; Motion Controllers; HMIs; AC / DC Servos Systems; COGNEX Machine Vision Systems.

 
     
     
 
 
ARCEE develops and successfully demonstrates - machine vision for Robotic Guidance with ABB Robot IRB 340
(Posted on Saturday, May 27, 2006)
 
 

We have developed machine vision with Cognex InSight 5100 camera for interface with an ABB IRB 340 robot for pick and place applications.

The program in the InSight camera uses the PatMax algorithm to train the required pattern, and extract the x, y, and theta orientation of any matching pattern found, whenever the camera takes a picture.

This program runs automatically when the camera is powered on, and the PC does not need to have InSight Explorer running, except for the initial setting up of the camera.

A customised calibration paper is used to calibrate the camera’s co-ordinate system with that of the robot’s co-ordinate system.

A software program developed by us runs on the PC at all times, and is used to extract the co-ordinates from the camera and deliver them to the robot’s S4C+ controller either over a serial port or on Ethernet. This program can be customised for different user applications to conveniently send all required parameters to the robot.

A program written in the S4C+ RAPID language is used to trigger the camera to to take the picture at the required times. It then collects the co-ordinates sent to it by the PC and executes, the required pick and place moves.

Here, It was shown, how cards placed at random orientations are picked by the robot and placed at a fixed user-defined orientation.

 
     
     
 
 
Product launch ! Congratulations! to our R&D team  (Posted on Monday, December 01, 2003)
 
 

In a short span of three months, the existing designs were rehashed, ladder programming implemented, HMI programming tool developed and the technical manual published.

ARCEE AUTOMATIONS proudly launches new generation of XYZEE Axis controllers and low cost standalone controllers for a wide range of applications. The controllers feature AC servo interface apart from existing DC servo and Stepper interfaces. The programming is by standard Ladder Logic and communication is open protocol MODBUS.

These controllers would find usage in Packaging, Machine tools, Robotics and Special Purpose Machines

 
     
     
 
 
L&T ECC entrusts ARCEE for a critical solution in warf crane appln. at Chennai Port Trust (Posted on Monday, September 01, 2003)
 
 

The WLL cranes supplied by L&T ECC to Chennai Port Trust was under commissioning. The crane is equiped with Siemens S7 controller and drives. The solution was required to report the motor fault status at the carriage level to the operator cabin which is at a height of about 75 metres through slip rings for diagnostic purposes.

ARCEE proposed use of VIPA PLC & ABACUS MC HMIs and the interface between PLC and display unit uses EDBT ( Extended Distance Binary Transmission ) protocol for communication avoiding expensive Profibus communication.

The system is commissioned successfully with considerable savings to the customer

 
     
     
 
 
ARCEE bags Namakkal at Tamil Nadu and Punjab bio-gas plants (Posted on Tuesday, January 07, 2003)
 
 

system integration orders with VIPA PLCs and De-central Profibus net working with 470 I/Os. The delivery and execution is crucial as the plants are scheduled for commissioning during March'03. Order value approx. INR 23,56,000.00

 
     
     
 
 
ARCEE Automations have been awarded (Posted on Friday, November 15, 2002)
 
 

a prestigious contract to system integrate the Bio- Gas Plant of Asia Bio-Energy Ltd's plant at Luknow and is currently under execution. This plant uses the municipal solid waste of Luknow city for bio-gas generation and power production. The system offered is 200V series of VIPA PLC with de-central Profibus net working and SCADA solution for plant control and management systems. Estimated order value of controls and electricals approx. INR 11,73,000.00

 
     
     
 
 
ARCEE AUTOMATIONS unveils scanned matrix PLCs for elevator applications  (Posted on Saturday, November 02, 2002)
 
 

The product ABACUS MC model 20L features: built in reliability and unique design for optimizing the input requirements and thereby saving the wiring cost. The basic PLC with CPU along with 8 inputs and 16 outputs plus expansion unit with 8 inputs and 16 outputs for G + 7 Floors and 2 such expansion units for G + 15 Floors. (Applicable for both collapsible & auto door)

 
     
     
 
 
ARCEE AUTOMATIONS offers low cost alpha numeric displays for VIPA GmbH (Posted on Sunday, October 06, 2002)
 
 

range of PLCs. VIPA on the displays front, are being supported by ESA Elettronica S.p.A of Italy. To make the HMI solution for lower end applications, cost effective, our R&D team has designed and developed text displays with 4 models to suit varying applications. Programming soft ware is available in both DOS / WINDOWS versions